“Mary Needs a Ride! So I’d Better Mach’ One”. (Forgotten Heroes 2021)

Now I mentioned back at the start of the month that I hoped to have time to complete one more “hero”, namely Mary Death’s car from the movie “Bounty Killer”. Well things have actually gone a lot smoother that I’d expected, so I’ve been able to get this finished too!! Before I get into the re-painting (and a little converting) of Mary’s ride I thought I’d give you a little background as to what made me want to do this. Partially to blame are Dave (The Imperfect Modeler) and Matt (PM Painting), who have both either built or hinted at building post-apocalyptic vehicles, and I’d mentioned that the “James Bond, collection” cars* were perfect scale wise to go with 28mm figures, and could be picked up on Ebay for various prices from £4.00 for the early edition cars up to £28.00 for the later less popular editions (the white Lotus, that blows up at the start of “For Your Eyes Only” is going for this price!, whereas the bronze one that replaces it is £8,00).

Anyway a bit later I watched the movie “Bounty Killer” during the first lockdown, and thought the character “Mary Death” would make a fun figure to do for “Forgotten Heroes” (see post at the start of the month**), Now Mary drives a distinctive yellow Ford Mustang Mach1 in this movie (at least until it is blown up thirty odd minutes in), and the old brain cogs started turning… “Now doesn’t Mr Bond drive a Mach1 in Diamonds are Forever?”, I thought, a quick look on Ebay later and one of my Christmas presents from the wife was ordered ready to be desecrated later in the year.

Now in many way I was more nervous about doing the car than I was about the figure, I don’t want to sound big-headed here but you see I’ve got a general idea what I’m doing with the figures, but I really was making this up as I went along! But luckily the quality of the model was actually pretty good and at £8.00 including postage wasn’t really any more expensive than a lot of resin car kits (and you got the interior detail as well!).

I started by removing the Mustang from its base (this was actually the worst bit as it had a “triangular” head screw!) Then I split the base of the car from the body (luckily crosshead screws!!) and removed the glass, interior, grill, rear lights and bumper. Happily I was also able to prize out “James” and “Tiffany” from the seats too, I thought I might have had to carve these away but they are separate “rubbery” plastic figures, so that was a plus! As I wanted the car driverless. I was then able to take some fine sandpaper and go over the removed body to form a “key” for the primer.

Next it was out for a couple of coats of white primer, and then a coat of matt yellow, This on further inspection was a bit lighter that the movie car, so once dry I gave the whole thing a dry-brushing with citrus orange, this seemed to work quite well, giving a rough slightly faded look (though on closer inspection it was now a bit darker than the original, sometimes you just can’t win!!). Now one of the front wheels on my car had rather dodgy paintwork on the chrome hubcap, so even though I planned on “weathering” these later on, I decided to give it a coat of chainmail, now this was darker and had less shine than the others, but as I said “weathering”, I also painted out the “whitewalls” on the tyres as Mary’s car doesn’t have these.

I turned my attention to the interior next, now even though you can’t really see much of this when the car is assembled I decided that bright red wasn’t going to cut in the dark future, So I repainted the seats and floor black, and then picked out the top of the dash and the door card inserts in chocolate brown, with some leather brown highlights. Next on the “to do” list was a rear spoiler, now apparently the actual owner of the car rented it to the production company and they added the boot spoiler and large “Mary” decal to the roof, though he was quite happy with these additions, and they still adorn the car (his daily driver) today along with Christian Pitre’s signature on the dashboard. Anyway my car didn’t have a boot spoiler so I was going to have to make one somehow, the answer “coffee stirrers!”. So taking a wooden coffee stirrer and sanding it with very fine sand paper I managed to get a pretty smooth finish, I then cut it to length (luckily the width was about spot on as was), I then cut off two of the curved ends and after sanding all the flat ends at an angle superglued these in place. Once dry I sanded the curves a bit to match the original more and painted it black, a couple of small blobs of greenstuff (also painted black were placed on the boot lid (trunk for any Americans) and it was glued in place. The front “splitter” was also a coffee stirrer, this time stuck to the plastic underside then a curve was built up with more greenstuff, and again painted black.

As I mentioned above in an act of pure self-promotion Mary has a large decal of herself plastered to the top of her car, now luckily someone had posted this image up to the internet, and when I’d put in a search for pictures of Mary it had also come up, so after a bit of messing about re-sizing the image I was able to print it out and a bit of PVA glue fixed it to the roof. I did consider painting this free hand (No I really didn’t!!!).

Now the bit I’d been putting off for as long as possible was finally here, the black stripes down the side of the car and the bonnet. I knew these were going to be awful to do and I almost left them off, but then it wouldn’t look right so…I started by masking off the lower areas of the bodywork and painting them in black, but once I took the tape away there was some “bleed”, in fact the area that looked the best was the bit ahead of the front wheels that I’d done free hand! Much head scratching ensued, until I decided to do the bonnet freehand as well (which I’m rather pleased with the result of if I’m honest). Now the “bleed” marks along the sides I could cover up with a line of chainmail as a chrome strip runs along here on the original, but the upper stripe didn’t have that. In the end I got some stickier tape ran this along to make the horizontal lines, painted these in as best I could, and did the small thicker lines running down at the front by hand. I also added the Mach1 badges badly by hand too. Much touching up with the citrus orange followed, and though they still weren’t great they were better. I had now got a plan to try and cover as much of this as possible with some liberal weathering.

That was next on the agenda, well after I’d added the indicators in orange anyway. So I decided the best way to tackle this was to do the wheels and underbody first so I could get to the inner wheel arches and all the tyres, one good dry-brushing with some saddle coloured paint later and I was ready to glue the wheels to stop them spinning I just prefer gaming pieces this way (and this would also stop me pushing it around and going “Brum,brum” and yes I had been!). The grill, rear bumper and lights along with the number plates were now put back onto the car before I gave the upper body a good dry-brushing too (well it would have been driven hard through the desert, so it was going to be dirty!), I then put the two halves of the body together, but without the glass and interior, and gave it another lighter dry-brushing with Eurasian flesh, paying special attention to covering up the worst of the side stripes!

I then took it out for a coat of matt varnish, this unfortunately, dulled the picture of Mary on the roof quite a bit, but a thin coat of PVA glue brought it back just enough to look worn but visible. All I had to do now was lightly dry-brush the windows, I put a piece of tape cut to the windscreen wipers sweep shape on the front screen before doing this then re-assembled the whole thing putting the screws back in to hold it all together. I have to say I’m quite pleased with the result, it’s not perfect by a long way, but it has come out better than I expected.

So that brings my part in “Forgotten Heroes 2021” to a close, I have to say I’ve thoroughly enjoyed this year (as always), and all the entries from the various people taking part this year have been magnificent (again as always). I’ve already got a couple of ideas for who I’d like to have a go at creating next year, of course in eleven months’ time that could all have changed. It’s Dave Stone’s “Season of Scenery Challenge” for the next two months, so that’s what I’ll be doing till September. So a final thank you to Jez for coming up with this wonderful challenge.

I’ll leave you with a fun fact, did you know that Max’s ride in Mad Max was going to be a Mustang, but it was decided that car and spares availability would be easier for the Australian made Falcon at the last minute?

So till next time, stay safe and cheers Roger.

  • These are cars from the James Bond films franchise, that are sold with a magazine each week, in one of those never ending and hugely expensive collections that come out every so often.

** https://rantingsfromunderthewargamestable.wordpress.com/2021/06/06/bounty-killer-forgotten-heroes-2021/

This entry was posted in 28mm Pulp, 28mm sci-fi, Forgotten heroes, Into the Wasteland, sci-fi and tagged , , , , . Bookmark the permalink.

32 Responses to “Mary Needs a Ride! So I’d Better Mach’ One”. (Forgotten Heroes 2021)

  1. Dave Stone says:

    Your Mustang has turned out great Roger, the weathering looks spot on and adds to the overall effect of the piece. Great find on the top picture, saved a lot of freehand ! LOL

    • Thanks Dave, of course I could have painted the roof freehand, but given the time restraints I thought I just go with the printed version (LOL not!!), I also found a copy of the version from the comic too, it’s very similar, but obviously a cartoon (in a similar style to the “Harley Quin” cartoon series).

      Cheers Roger.

  2. Another awesome FH posting, Roger. Love the work you’ve done on the Mustang to tie-it in with your figure. Marvellous idea with the not-freehand on its roof and great weathering too. What a corking pairing you’ve completed.

    • Thanks Simon, I was more nervous about doing the car than the figures to be honest. The stripes down the sides gave me nightmare!!! (shame I couldn’t just print those out too! 😉).

      I’ve been looking on Ebay (something I should never do!), and I keep being tempted to buy some more and motorize some of my Wasteland figures. (As I said I should stay away from Ebay!).

      Cheers Roger

  3. Matt says:

    Roger, if I didn’t know you’d customized that car I’d think it was bought in a store. What a phenomenal job you’ve done on it; the yellow looks great, the spoiler/stripes you added are excellent, and the weathering is superb. You can’t see me, but I’m applauding you over here in VT.

  4. Alex says:

    Mate, this is brilliant! Superb execution on the car, the weathering is perfect. Top marks for thinking about the wiper sweep when weathering the windscreen – that really sells the whole thing in my opinion!

    • Thanks Alex, the weathering was really a “hide all” for the dodgy stripes and Mach1 badges, but I think it works, as when would you find time to wash you car after the apocalypse? 😉

      Cheers Roger.

  5. Excellent work there, Roger! 🙂

  6. Excellent Roger, a great conversion I must say. You’ve wetted my appetite to look again at doing some cars, something I put on the back burner in preference to my current project. The scale really does look spot on too. The freehand and weathering have really worked out well and nice work on the spoiler. 🙂

    • Thanks Dave, yep as i said over on your blag a while back, the James Bond cars are just about perfect size wise for 28mm, the details pretty good on them, they are relatively easy to take apart, and cost about the same as a lot of resin one piece castings. There’s some pretty cool cars in the range too. I can see I’ll be looking again to pick some more up at some point. 😀 I could have done with your steady hand when it can to the stripes mate!

      Cheers Roger.

  7. This is soooo cool Roger. Well bloody done. The dry brush with orange worked a treat and I love the coffee stirrer boot spoiler. Genius! Oh and the decal turned out really well too. I’ll try and watch Bounty Killer tonight

  8. angrypiper says:

    Great work, Roger. I have never seen Bounty Killer, but the mere fact that she’s named “Mary Death” is reason enough to watch it in my book. The car looks spectacular and the weathering is terrific. Well done!
    I have a resin Ford Falcon Interceptor from a certain Dave Stone’s shop. It’s currently sitting unpainted, but you’re making me want to change tracks!

  9. That’s a badass ride my friend 😎👏

  10. borderguy190 says:

    Wow. Whole job is aces. Well done, Roger!

  11. Pete S/ SP says:

    That is a great Roger, very cool and a load of skill has gone into it too.

    Cheers,

    Pete.

  12. Excellent work there Roger… it looks spot on.

  13. Carrion Crow says:

    Once again, you’ve raised the stakes for what can be achieved if you put your mind to it. Superb conversion work and awesome painting.

    As an aside, the Batman Automobilia range from Eaglemoss also scales in well with 28mm figures and is an inexpensive (comparatively) way to get some cool looking vehicles.

    • Thanks Jez, not really a lot of conversion work, just a couple of coffee stirrers stuck here and these to be honest.

      You are absolutely right about the Batman vehicles too, great “Superhero” cars, or some of the newer incarnations would do duty as Sci/Fi military vehicles too (though I would love the Adam West Batmobile myself 😁.

      Cheers Roger.

  14. Roger, Roger, Roger. An absolute stunner of a ‘stang, (though it is American and has a hood and a trunk instead of a bonnet and boot). 😁 The strips are aces, but the WEATHERING is what ties it all together. Love the attention to detail, and spoiler alert, I love the spoiler!

    • Thanks Mark, actually I work in a car factory and we call them “hoods and trunks” there, but at home they are “bonnets and boots”, two nations separated by a common language as they say 😁.

      I was rather pleased with how the spoiler came out to be honest 😀.

      Cheers Roger.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.