“Brum, Brum!”

“Hey stop! I want to buy a soda, anyone else want a soda!”

“I ain’t stopping here man!”

“Why not?”

“You see what happened to the last car that stopped here?”

I’m staying in the “Wasteland” again this week but rather than bore you with another post about painting “post-apocalyptic” figures I thought instead I bore you with a post about painting “post-apocalyptic” vehicles instead (got to keep your readers amused, as they say!). So having recently ordered from “Wargames Terrain Workshop”, and “Losing my WTW cherry!!” (Dave’s words not mine). I set about one of the three vehicles I bought, a rather sorry looking scrap vehicle and…a drinks machine?

Both vehicles I tackled in a very similar fashion so I will cover these together, after the castings were cleaned up, I added the separate prop-shaft to the “mobile” one (yes it even has detail underneath!) Sadly I managed to break the blooming thing so added both pieces separately and built a little “transfer box” out of greenstuff to hide my shame! Both models them went outside to be sprayed up with some matt black, and this was then “touched up” (along with the underside of the one) with a brush and some more black paint. Both were then dry-brushed with chainmail, then rust was stippled over areas of the models where I thought rust would form. Next the wreck was stippled with some mid blue and the “Hot rod” with royal purple, in-between the areas of rust. These areas were then lightly stippled again with pale blue and lilac to give a lighter faded look to them. Now I did think about adding custom flames to the “Hot rod”, but thought that would be a pain to do, so instead I just painted one of the front doors in coffee and cream, then added some flames to this in bright red, orange, lemon yellow and black, as if it had been salvaged off of another car to repair this one. I added the lights and details next using silver, terracotta, and orange. And a small piece of the backseat of the wreck is visible, so more terracotta was added to make the seat a faded red, and coffee and cream were added to the exposed bit of “wading and foam”. Next I repainted (and tidied up) the tires and the odd area here and there with some black, before they were both given a coat of “Quickshade”. Once this was dry I went over the rust areas again, then added some orange highlights over these for fresher rust areas, and finally I gave them a selective dry-brushing with some butternut to add dust and dirt. Now the wrecked version needed its base painting and this I did in my usual way of a base coat of chocolate brown, then successive dry-brushes of khaki and coffee, then areas being picked out in scenic green. Now before I flocked said areas with some Javis “Summer mix” hairy grass, I added a few bits of “rubberized” moss to represent weeds and vegetation growing up it, then as I said it was flocked.

My “Coke” machine I took a slightly different tack on, rather than spraying the whole thing black I started by taking a piece of fine sandpaper and “roughed up” the areas at the sides and the curved font to make a better key for what I had in mind later on, then painted the back, top and exposes edges in matt black, before dry-brushing them in chainmail. I then put in a search of Google images for “Coca Cola” logos and of the ones that came up I picked two that looked suitable. These I then resized to fit the front and sides of the machine (Sounds easy, but I printed four out before I got it right!!), the side panels were then painted with PVA wood glue and the paper logos were applied. The front was a bit more difficult as the hole for the cans to come out of had to be cut out, this I did by holding the paper in place and with a really sharp knife cutting a rough shape, that I then refined away from the resin machine (it was a little rough but I could paint in any rough edges later). Next I took some dark red and roughly painted around the lettering on the sides, then did this again as a sort of highlight with terracotta red, handily this was pretty close to the red I had printed out, I also used a bit of these two colours on the front picture and the top of the machine too to tie the whole thing together. I repainted the white on the front (to tidy up around the hole, and touched up the lettering here and on the sides. Then touched up the black on the bottle, and added the mid grey shadow on the curved “slashes” through the side logos. Next I took some terracotta, white, dark red, shamrock and orange and added the selection buttons down the side of the front before adding some details in white or mid grey. This however was now looking far to pristine (this is the wasteland after all!) so it was out with the rust and this was dry-brushed/slapped about around all the edges, I then went over this with a highlight of orange, now it looked as if it had been left out in the desert for a hundred years! This too then had a coat of strong tone “Quickshade” and once dry I went around once again with the rust and orange, to add some “fresher” areas of rust.

All three were finished off with a coat of matt varnish. I’m pretty happy with how all three items turned out, and I have to finish with a big thank you to Dave Stone, of WTW for all his help and service, he’s a great chap to deal with, and very talented to boot! I have a few more bits from Dave’s range to do, but next week I think I’ll get the last of my “Wasteland” figures finished.

Till then, cheers Roger.

Advertisements
This entry was posted in 28mm sci-fi, Into the Wasteland, Scenery, sci-fi and tagged , , , . Bookmark the permalink.

24 Responses to “Brum, Brum!”

  1. Stunning stuff, Roger, simply stunning. Dave does some staggering resin pieces, and I’m so glad to see you applying your tip-top paint-jobs to some of them. Marvellous… and looking forward to your Dr Pepper drinks machine in the next posting 😉

    • Thanks Simon, he does do some rather nice stuff doesn’t he I have two more cars to do at some point. Sorry but only have the one Soda machine (and it’s your fault I bought this one!), and it wouldn’t have been Dr Pepper anyway, I did also search logo’s for “Vimto” too, I know you bought your transfers from somewhere, but I’m just too cheap to do that!

      Cheers Roger.

  2. These are absolutely superb Roger! I do like the cars, but my favourite has to be the coke machines – brilliant job Sir.

  3. Dave Stone says:

    Stunning work on the cars and coke machine Roger, the weathering you’ve done on all three looks spot on

  4. Bryan Scott says:

    Absolutely superb! You should be rightly proud of all three models. Dave produces loads of excellent stuff and I’m glad you’ve finally discovered just how good his range is yourself.

  5. Very nicely done Roger

  6. Roger, they look like scrap…which is a good thing in this case, so well done!

  7. borderguy190 says:

    Fantastic Roger! That Coke machine is incredible. The rust is really well done. *puts brushes away…*

  8. angrypiper says:

    I’ll add to the chorus of those praising your Coke machines, Roger. Those look fantastic! I had thought of using a similar technique for the logo of an armored truck, but like so many projects, it got sidelined somewhere along the way.
    Great work!

    • Thanks Keith, I wasn’t sure if you lot would consider it cheating to print out the logo’s (but there was no way I could have painted them as good a s that!).

      I too have so many projects that have been sidelined over the years!

      Oh by the way there is only one coke machine, I just took two photos of it 😉

      Cheers Roger.

  9. angrypiper says:

    I see that now. Perhaps I should have clicked on the picture to enlarge it. Doing so gives me an even greater appreciation for the job you did.
    And it’s hardly cheating to make something look as good as possible. That’s why they make decals, right?

  10. Roger, I really appreciate the work that you have done here. I’m trying to get better at weathering (not one of the things that I usually do), so this was very helpful. As you Brits say, a “cracking job”, as we Massachusetts guys say, “wicked awesome “! I love them all, but the Coke machine is stunning.

    • Thanks Mark, that is most kind of you, though it is reassuring to hear that there is a part of the miniatures hobby you do not excel at 😉

      Why is the American saying so much cooler sounding than the British one ;-b

      Cheers Roger.

  11. Well, for us cracking gets too close to being anatomical 😛

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.